The T14 shape is the newest model in our kart seat range.
The seat has been released initially for smaller drivers, with an upright back position and additional leg support. The T14 takes the place of the discontinued T8 which also had leg support.
Currently the T14 is only available in the smaller Cadet/Minikart sizes, Mini, Ccd, CL and XScd.
The reason for only having four small sizes is that older juniors and adults are typically strong enough and bracing with the legs is not necessary. The extra width of the leg support can also be a problem with adult sizes, as it miss-aligns the sensitive airbox on many engine combinations. However, the added support can be ideal for classes where a particularly small or in experienced driver struggles to control a faster kart.
T14VG is what we call a medium/soft rigidity seat. The VG rigidity is often popular for its middle range of flexibility, offering the best of both worlds. The T14VG will unweight the rear wheel, freeing a low power engine of inner tyre drag. For more flexible options we recommend the T14VTI. See our rigidity chart for a further understanding.
Prices where listed exclude VAT & shipping.
Made to order in the UK - T&C's apply.
Please contact Customer Service for delivery times.
This is important as a good fit is essential for the protection of the driver and the handling of the kart. If a driver is loose in a seat he will pull to steer, pulling himself out of the kart, making it bounce at the slightest provocation.
To assess whether or not the size of a seat that you have in your possession is correct, sit the driver should in the seat and feel the gap over the leg bone, the hip bone and down the length of the ribs, from top to bottom. This must be done with any rib protection in place, but the race suit is not so important unless it has integral padding. The rib protector when worn tight, should not move inwards as the driver sits back in the seat. Once sat back in the seat, it should be difficult to squeeze your fingers between the seat, your ribs, hip and leg bones. It’s important that all the points are evenly pressured and no one element is either loose or pinching. If one area feels loose, some firm foam stuck between driver and seat is acceptable. If it is pinching you need a different size.
To assess the size without having a seat in your vicinity, we find that denim Jeans waist size, weight and height are good indicators. Coupled with information about the chest circumference and rib protector type. An over thick rib protector can make two sizes difference and leave you with very loose hips, so this is to be avoided (i.e. buy a P1) or accounted for with a WT wide top T11 seat.
Now you have a good fitting seat it is important to fit it correctly, half the weight of the kart moved 5 mm out of position will alter the balance. Over the years the average seat position has been going back in the chassis. And the average is now three cm further back than it was in the late nineties.
Please see our fitting guide PDF to help with this.
