Telephone:
+44 (0)1795 420312

customerservice@tillett.co.uk
TILLETT RACING ACCESSORIES
CHAINGUARDS RIBCAGE RIB & HIP PADS
RAIN MEISTER T BOARD SEAT FITTING JIG NYLON WASHER
RACE INSERT CARBON & COMPOSITE FLOOR TRAYS  

Tillett Chainguards

Enclosed chainguards are mandatory throughout UK karting and also in CIK classes.

Nylon Chainguard Rotax/TAG version

New TAG Nylon Chainguard

This tough Nylon chainguard is suitable for the Rotax Max TAG engine and there is also a shorter version where the front is cut off, for X30, IAME Gazelle and OK engines. The Nylon guard is available in black or red and has a long bracket kit as standard, which keeps the guard more rigidly located and helps move the fixings above the exhaust of the Max, making access easier.

The guards are smooth inside and out to help cleaning and have no unnecessary holes which trap oil and dirt. Each guard includes a universal bracket set, which make it easier to work on the kart as complete removal is simple and takes seconds. Adjustable mid point to allows the sprocket to run centrally in the guard. It is also easy to cut and modify to fit most engine / kart combinations.

Back to TopBuy Now

Nylon Chainguard Rotax Red


Composite chainguard Rotax/TAG version

Composite chain guard - Rotax/TAG

The newly developed composite guard range uses our new process. This means that they are much lighter than the original at only 270g for the Rotax and 230g for the X30 IAME version. They retain their rigidity and do not wobble like plastic guards, due to the honeycomb core on the mounting side. The new model is much stronger and has a glossy surface inside and out for ease of cleaning.

Two types of cut are available. One with a trimmed off front for OK, X30 and IAME Gazelle engines, and a longer version for Rotax Max and other engines that require that the clutch are covered. It is now also cut to suit other makes of OEM bracket kit without trimming.

When used with the full Tillett bracket fitting kit the mid point is adjustable to allow the sprocket to run centrally in the guard. The new guards have been made wider to avoid contact with long sprocket bolts when wide plastic protectors are used.

Guards are not supplied with a mounting kit as standard. If needed please add a full kit from below or the half kit containing the special spare bolts that fit in the guard.

Five New fluorescent colours, a silver and carbon finish are now also options made to special order.

Back to TopBuy Now

Composite chainguard Rotax/TAG version

Composite chain guard - OK/IAME/X30

The newly developed composite guard range uses our new process. This means that they are much lighter than the original at only 270g for the Rotax and 230g for the X30 IAME version. They retain their rigidity and do not wobble like plastic guards, due to the honeycomb core on the mounting side. The new model is much stronger and has a glossy surface inside and out for ease of cleaning.

Two types of cut are available. One with a trimmed off front for OK, X30 and IAME Gazelle engines, and a longer version for Rotax Max and other engines that require that the clutch are covered. It is now also cut to suit other makes of OEM bracket kit without trimming.

When used with the full Tillett bracket fitting kit the mid point is adjustable to allow the sprocket to run centrally in the guard. The new guards have been made wider to avoid contact with long sprocket bolts when wide plastic protectors are used.

Guards are not supplied with a mounting kit as standard. If needed please add a full kit from below or the half kit containing the special spare bolts that fit in the guard.

Five New fluorescent colours, a silver and carbon finish are now also options made to special order.

Back to TopBuy Now

Carbon chainguard KF version

Carbon Kevlar® Chainguard

The Carbon Kevlar® Tillett chainguard is the lightest on the market at 170 gm in a RHD/Rotax version and is 138 gm when cut for the OK, IAME Gazelle and X30 engine classes. Unlike many products that cosmetically use carbon look materials, the lightweight Tillett guard uses genuine carbon and is Kevlar® brand fibre lined for ballistic protection against a thrown chain.

It also has two smooth sides making it easy to clean. Each guard includes a universal bracket set, which make it easier to work on the kart as complete removal is simple and takes seconds.

(Carbon fibre brackets are also available at extra cost)

Back to TopBuy Now

Honda GX160 chainguard

Honda GX160 Chain Guard

The newly developed Honda composite guard range is much lighter than the original at only 195g. The new guard is much stronger than the old model and has a glossy surface inside and out for ease of cleaning. It has been redeveloped to be a perfect fit on the engine and it is designed to compliment the new 2020 UK Honda Cadet Exhaust. At the same time the new guard will clear sprockets (when used with the new bracket kit) when the chassis is dropped lower. The new guards also better avoid contact with long sprocket bolts, when plastic protectors are used.

Guards are not supplied with a mounting kit as standard. Please add a Honda bracket kit from below if required.

Five New fluorescent colours, a silver and carbon finish are now options which are made to special order.

Back to Top Buy Now

Carbon Chainguard brackets

Carbon Chainguard brackets

 

Back to TopBuy Now


Featured links