We regret our online shop can no longer process orders from the Channel Islands. Please contact us for shipping costs and to place an order.
Please be advised, due to very high demand, deliveries may be over a month. Please contact us if you would like to confirm an available delivery date for your order.
New to the Shop Fitting kits International Dealers

TR1 Adjustable seat runner set

TR1 Adjustable seat runner set

The TR1 adjustable seat runner set is double locking for safety and they allow 25 cm of leg length adjustment.

They can be used in conjunction with car seats B1, B2, and B4 when using the TB1 brackets. They can also be used under the TBF1 brackets when using seats B6 Screamer, B6 XL Screamer and B7 and also when fitting the B5 seat coupled with TB2 or TB3 brackets, turned under the seat creating a narrow footprint.

When using the bottom mounted B6 seat and directly mounting the TR1 runners under the seat without brackets, a special fitting kit TK5 with extra spacers is needed. For more info, click here. When the option of a side mounted B6 is taken, then the runners will need bracket sets the same as used for the B6 Screamer, B6 XL Screamer and B7.

The TR1 runners can also be bolted directly to the bottom the W1/W2 seats, but only when these seat models are fitted with the optional back frame.

Weight: 1.38 kg

Please note we strongly recommend that you do not use seat adjustment runners for race use.

View our TR1 and TR2 runner information sheet.


 
Our PricePlease Select
 

Prices where listed exclude VAT


The TR1 adjustable seat runner set is double locking for safety and they allow 25 cm of leg length adjustment.

They can be used in conjunction with car seats B1, B2, and B4 when using the TB1 brackets. They can also be used under the TBF1 brackets when using seats B6 Screamer, B6 XL Screamer and B7 and also when fitting the B5 seat coupled with TB2 or TB3 brackets, turned under the seat creating a narrow footprint.

When using the bottom mounted B6 seat and directly mounting the TR1 runners under the seat without brackets, a special fitting kit TK5 with extra spacers is needed. For more info, click here. When the option of a side mounted B6 is taken, then the runners will need bracket sets the same as used for the B6 Screamer, B6 XL Screamer and B7.

The TR1 runners can also be bolted directly to the bottom the W1/W2 seats, but only when these seat models are fitted with the optional back frame.

Weight: 1.38 kg

Please note we strongly recommend that you do not use seat adjustment runners for race use.

View our TR1 and TR2 runner information sheet.

No recommended products at the moment.
 
TB1 Aluminium bracket set for B1, B2 or B4
View

TB1 aluminium side mounting brackets are 5 mm thick andsuit the B1, B2 or B4 car seats in race and track applications.

These allow the seats to be tipped, raised and lowered. TB1 brackets can be used with TR1seat adjustment runners.

However, it is not recommended to use any seatadjustment runners on a race or track day car, as they are only intended for road use.

Contains: 2 TB1 Aluminium brackets

click to see more

 
 
W1i Carbon/GRP Racing Car Seat
View

 

The W1i Tillett car seat is extremely narrow yet it can still accommodate a majority of drivers. You have the choice to order a 40 or 44 cm front. The two specifications remain the same size internally. The 40 cm version is made to allow fitment between the gearbox tunnel and the door sill. A 40 cm front will fit a Caterham, Westfield and most other similar narrow vehicles. With the 44 cm version the rolled edge is left on giving a more aesthetically pleasing line to the edge of the seat, therefore if you have the room go for this model.

From 2014 the W1i has been available with a new version of the floor mountable back frame. When the W1i is ordered with the back frame the 4 x M8 mounting points are set under the seat as standard, This means that the TR1 Tillett Adjustment Runners can be bolted directly to the underside of the seat. Mounting of the seat is also possible straight to the floor using a two pieces of 35 mm box section or maybe an existing runner system. Nylon spacers can be supplied to tip the seat at different angles and take up any gaps whilst keeping the seat as low as possible.

With the new backframe a side mount option is available at no extra cost. but this must be specified on the order. With the side mount option it is then possible to use the EB F1, TBF1, TB FIA, TBF5 and TB5 brackets.
 

The W1i can also be ordered with or without covering. A half covered example is ideal for open top cars. Seat belt harness holes are included. This W1i shape is the seat most suited to Formula Student University projects.

click to see more