We regret our online shop can no longer process orders from the Channel Islands. Please contact us for shipping costs and to place an order.
New to the Shop Fitting kits International Dealers

TLPK1 special low profile fitting kit

TLPK1 special low profile fitting kit
Contains:
2 x 70mm Stainless low profile bolts
2 x 30mm Stainless low profile bolts
4 x 25mm Stainless low profile bolts
8 x M8 25mm Stainless low profile washers
8 x M8 flanged Ny-lock nuts
10 x 40mm diameter x 2mm thick Nylon spacer washers
10 x 40mm diameter x 4mm thick Nylon spacer washers
2 x 40mm diameter x 10mm thick Nylon spacer washers
 
Our Price£54.00
 

Prices where listed exclude VAT


Contains:

2 x 70mm Stainless low profile bolts
2 x 30mm Stainless low profile bolts
4 x 25mm Stainless low profile bolts
8 x M8 25mm Stainless low profile washers
8 x M8 flanged Ny-lock nuts
10 x 40mm diameter x 2mm thick Nylon spacer washers
10 x 40mm diameter x 4mm thick Nylon spacer washers
2 x 40mm diameter x 10mm thick Nylon spacer washers

This new high specification new stainless steel low profile fitting kit allows a complete seat to be fitted with bolts for four main stays and four extra seat stays.

The kit also includes a nylon washer spacer kit to make sure that you have every combination of spacer required to fit a kart seat.

The incredibly flat bolt and washer combination does not destroy you race suit, your rib protector, or your body. They enable you to tighten the seat bolts without fear of the washer pulling through, as they often do with plastic countersunk washers, or bottoming out as they can do will regular steel washers. The design of the washer is such that it allows the head of the bolt to twist in the washer which stops the seat from breaking during the twisting forces generated by the chassis.

 
V pads
View

The new V pads are made to cover the rib area. By covering the seat bolts they stop the commonplace holes appearing in the race suit, caused by the fabric being pinched between the seat bolt heads and a hard shell rib protector.

The V Pads are suede covered and have high quality Velcro attachment to ensure the pad does not come off when jumping in the kart.

V Pad Large (S to XXL)
V Pad Small (C to XS)

click to see more

 
 
T11t Racing Kart Seat
View

 

As used by 2020 Junior World Champion Freddie Spencer Slater.

The T11 is the most popular adult shape and the one most often used by professional karting teams and manufacturers. With every generation growing taller, a new seat was needed. A large flat area on the base was created and combined with a more reclined back angle of 58°, lowering the head height significantly. Whilst lowering the body weight gives a performance advantage, it is important to maintain an upright shoulder position to allow enough power to be transferred to the steering. The driver is likely to "pull to steer” if they are too reclined, which is bad for handling and body stability. The T11 shape enables the correct upper torso angle to retain firm control and therefore performance.

The T11 is manufactured using our own highly developed moulding technique, which makes a seat with a consistent laminate weight and thickness. It also has smooth surfaces front and back, which keeps the seat looking professional and clean. Unlike previous mechanised production methods, this unique system gives us the opportunity to tune the rigidity. The T11 model also benefits from a specially developed high strength resin and it contains a much higher fibre to resin ratio than regular laminates. This makes the seat less likely to splinter during drilling and more able to withstand impacts. Another benefit of this system is we can aesthetically change the seats to have a beautiful carbon, silver, or vivid neon coloured finish.

The four rigidities made available in the T11 are the ones mostly used in current chassis designs. Over recent years the chassis have required more flexible seats. Therefore, the standard rigidity is the most rigid of the four offered. The two most popular rigidities are the mid-range T11t rigidity, which is frequently used in X30, OK and KZ. (This "t” stiffness sits in between the flexible VG and the T11 Standard.) and the very popular soft and flexible T11VG. The most flexible specification is the Vti which is predominantly used in the T5 shape in very low torque karts in the 8 to 12 year old categories.

The T11 size range is large and includes many sizes in a "WT” wide top version. These help correctly fit drivers who either have narrow hips and a wide chest or use a very thick rib protector, such as the protectors we make bespoke on individual drivers.

Special order T11 hand laminated seats made for drivers with wide hips are available in three sizes S, Manetti and ML

 

click to see more

 
 
STRO (Formerly TR2) Adjustable seat runner set

Identical to the STRi but with the handle 90 mm wider to accommodate being fitted under outward pointing brackets, such as the STBO, PTBO, TBFIA, TBB5 and TBB5T.

1.38 kg

Please note we strongly recommend that you do not use seat adjustment runners for race use.

View our TR1 and TR2 runner information sheet.

Our Price: £116.00

click to see more